Project Plus

Skateboard deck, skateboard grip tape, razor blade or box cutter and file are only the important things which you will want to competently apply grip tape towards your longboard. These steps for the application of tape are: sector 9 deck • Remove all traces of visible paper on the back of the grip tape. And now you will only have the sticky area. •You need to use the piece of the backing paper to hold the surface of the tape to protect your hands from the sticky area. •Cut the grip tape way more compared to the dimensions from the midpoint on the board. Allow the grip tape to hang down a little in the central point. This is to make sure that the grip tape on the middle of the board would stick. As soon as the midpoint has been stuck, ensure that you carefully stick on the edges and this should be done from the center outwards. Because this is really sticky, remember that you have to handle this very carefully. loaded longboards skateboard •Use a metal file or else a metal beam of a screwdriver, so that you can scratch in the region of the boundaries of the longboard skateboard deck. Make sure that you firmly rub these constantly until you have removed all the grains. This would ensure that there is a white outline which is visible within the grip tape which would help in sketching the limits of the board. •Using a cutter or razor blade, you position this 45 degree and cut upward to remove excess grip tape. You need to do this starting at the nose or the tail. After that follow the white outline and run the blade in along the edge of the skateboard longboard deck eliminating further grip tape. longboard company •You can make use of the metal file to stage all irregular edges just with regard to the sides from the longboard.•Lastly, make use of a screwdriver in order to push holes all the way through the grip tape wherever the trucks would be accumulated.